Dryer Repair

You depend on your dryer to help you manage your regular household routine. So, when it breaks down, the inconvenience can be overwhelming—but you don’t have to fret.

If you live in Folsom, CA, Greg’s Appliance Repair can help restore your clothes dryer back to optimal working condition. We are the leading appliance repair service in the Folsom area. We repair most major dryer brands.

We are committed to offering quality dryer repair to ensure your appliance can serve you effectively for several more years.

Common Dryer Issues

Here’s a look at some of the common signs that you may need to contact a dryer repair specialist:

Dryer doesn’t start

If your drying machine doesn’t start at all, it could be an electrical fault you can fix yourself.

Check to make sure the dryer is plugged correctly into the power outlet. If it is, but the appliance still won’t turn on, check if the circuit breaker has tripped. If the circuit breaker attached to the appliance has tripped, flip it back on.

If your dryer still doesn’t start or starts but continually trips the breaker, then you should call in an appliance repair service.

Clogged dryer vent

Improper ventilation is one of the primary causes of dryer failure. If the hot, moist air can’t escape from the dryer, your clothes will remain damp at the end of the drying cycle. Also, a clogged dryer vent can result in increased noise as the dryer runs.

This blockage can damage the appliance itself, which can lead to premature shut down of the heating system. To avoid these problems, make sure you clean out the lint filter before each load. It’s advisable to clean out your machine’s entire ventilation system at least once a year.

If the problem is more severe, you would want to bring in a reputable dryer specialist for a professional vent cleaning.

The dryer isn’t spinning

If the dryer turns on, but it won’t spin, it could be a sign of a worn dryer belt. The problem may also be a result of a faulty switch or a defective motor. If the culprit is the motor or switch, it’s important to call a professional to fix the problem.

The appliance isn’t heating

If your dryer isn’t heating, check to ensure nobody has bumped the settings. Some dryers have a configuration that only blows out air and doesn’t heat. If everything is in order, but it still won’t heat, something could be wrong with the ignition.

The electronic ignition is one of the hardest parts to access in a dryer if you don’t have the right tools. So, you’ll need to contact a specialist.

The machine makes strange noises

While a dryer usually produces some sound, unusual squealing or a grinding noise is an indication of a problem that needs attention before it results in more damage. A loose drum belt typically causes a squealing sound as it slides around the drum’s exterior.

This problem can be solved by replacing the belt or idler pulley. Grinding noises, on the other hand, are normally caused by worn drum supports or glides that support the dryer drum’s front. The solution is replacing the worn components.

Call Greg’s Appliance Repair of Folsom, CA

If you’re experiencing any of the above issues with your dryer, or the appliance is not working as it should, give us a call at Greg’s Appliance Repair today. Our experts offer quality dryer repair service with 100% satisfaction guarantee.